SOLID FILM LUBRICANT BL-A
Roly International SOLID FILM LUBRICANT BL-A is a bonded lubricant. If you are in need of a lubricant, you will most likely think of a liquid such as oil or a solid such as grease or powder. However, those lubricants do not work in some of today's high technology machines because of extreme temperature ranges or high winds.
The ideal anti-friction compound is a solid material which adheres strongly to the parts to be lubricated. Roly International has an excellent bonded lubricant which permanently adheres to the moving parts and extends the life of these parts without the worries of loss of lubricants due to wind or lack of lubricity from changes in viscosities. Some liquid lubricants will become acidic and corrosive after some time. Powdered lubricants may get into undersirable places, but Roly International SOLID FILM LUBRICANT BL-A solves all of these problems since it stays in place by it's built-in strong adhesion and affords steady lubrication for extended periods of time. In addition, Roly SOLID FILM LUBRICANT BL-A has corrosion fighting properties as well.
As all of our other products, SOLID FILM LUBRICANT BL-A is assured a factory sealed high quality product as it is developed and produced by our own modern manufacturing facility in Ventura, CA, USA.
Metal surface preparation would greatly lengthen the life of the lubricated parts. Either vapor degrease or use Roly ELECTROCLEAN EC-A(3). Then phosphate treat or passivate substrate. Roly SOLID FILM LUBRICANT BL-A is easy to apply since it is designed to air dry. Shake container to insure proper mixing. Hold container upright 8 to 12 inches from surface to be lubricated and spray a thin coat (0.0002 to 0.0005 inch thickness is recommended. Allow at least 6 hours to properly dry before using parts. Use in well ventilated areas and observe all other cautionary statements on the label.
Please refer to our brochures for detailed technical information as well as our other fine Roly International products or contact us for any questions you may have regarding our products.